- Home
- Detecting Adventures All
- Dan's Laynards, Lanyard (red, orange, slate blue, hunter green, Sea Foam and black) - 36"
Dan's Laynards, Lanyard (red, orange, slate blue, hunter green, Sea Foam and black) - 36"
Related Products
The Ugly Book by DA Frank Lopergolo
The Ugly Book by DA Frank Lopergolo
$18.45
*** Now shipping ***Filled with life experiences and quirky stories, The Ugly Book is a comprehensive guide on the use of the Ugly Box written by renown Treasure Hunter Frank Lopergolo. Frank worked with a local University to develop an Electrolysis unit that stops the deterioration of metal objects dug out of the ground and preserve them for ye...
Minelab Equinox 11" Coil Support
Minelab Equinox 11" Coil Support
$10.95
Minelab Equinox coil support for the 11” stock. As you may know the ears of the Equinox coils can sometime snap off the coil if pressure is put on the coil when getting up off the ground after digging your hole. A slight tweak and snap your coil is trash. To replace the stock 11” coil it will cost $229. Our coil supports are custom made to fit ...
UGLY BOX 12 Volt Wall Charger
UGLY BOX 12 Volt Wall Charger
$20.00
UL approved 12 volt wall charger for the Ugly Box T.N.T.
Aqua-Tek Waterproof Headphones for Equinox
$159.00
Aqua Tek headphones are designed for comfort and fit. 200 '+ Depth Rating Conical speakers for Deep Rich Tones High Quality Minelab approved Connector by Holin MFG. Cords and Wire Made in USA Perfect for Land, Snorkeling and Diving 2 Year Warranty Compatible with VM08 Wireless Module
Detecting Adventure 8" T-Rex Stainless Steel Sand Scoop with 3/8" Honey comb holes
$239.00
The T-REX bucket is approximately 11” long by 8” wide and 4 7/8” deep. The top of the scoop is 5” deep to prevent targets from being knocked out of the scoop while hunting in the surf. On the top of the scoop is a tube to attach your handle. The Handle tube is angled at about 20 degrees so digging is easier than with a straight up and down ...
Minelab Equinox 15" Coil Support
Minelab Equinox 15" Coil Support
$11.75
Minelab Equinox coil support for the 15” coil. As you may know the ears of the Equinox coils can sometime snap off the coil if pressure is put on the coil when getting up off the ground after digging your hole. A slight tweak and snap your coil is trash. To replace the 15" coil it will cost $239. Our coil supports are custom made to fit exact t...
Thresher Submersible Headphones for Minelab Equinox/Manticore/X-Terra Pro
$159.00
Designed for comfort and fit. These headphones are made of the highest quality materials and best of all the are Made in the USA. 200'+ Depth Rating Oversized Speaker Elements for Deep Rich Tone High Quality Minelab Approved Connectors by Holin MFG Cords and Wires are Made in the USA Perfect for Land, Snorkeling & Diving Assembled in the US...
Detecting Adventures T-Rex Stainless Steel 9.5" With 3/8th Inch Honeycomb Holes
$259.00
The T-REX bucket is approximately 11” long by 9 1/2” wide and 4 7/8” deep. The top of the scoop is 5” deep to prevent targets from being knocked out of the scoop while hunting in the surf. On the top of the scoop is a tube to attach your handle. The Handle tube is angled at about 20 degrees so digging is easier than with a straight up and down h...
Minelab Equinox 6" Coil Support by Detecting Adventure
$11.75
Minelab Equinox coil support for the 6” stock coil. As you may know the ears of the Equinox coils can sometime snap off the coil if pressure is put on the coil when getting up off the ground after digging your hole. A slight tweak and snap your coil is trash. To replace the stock 6” coil it will cost $179. Our coil supports are custom made to ...
Thresher Submersible Headphones for Deus II
$165.00
Designed for comfort and fit. These headphones are made of the highest quality materials and best of all the are Made in the USA. Important: Because of the higher volume available, these headphonesare designed to operate in the BH01 (Bone Conduction) mode only. 200'+ Depth Rating Oversized Speaker Elements for Deep Rich Tone High Quality Minel...
Detecting Adventure Shaft Mount Pinpointer Holder
Detecting Adventure Shaft Mount Pinpointer Holder
$14.75
Detecting Adventure Shaft Mount Pinpointer HolderThis pinpointer holder will fit standard round detector shafts 7/8” diameter. It is designed to fit Deus, Garrett, and Land or Sea pinpointer. Also, any cylindrical pinpointer which tapers from 3/4” at the tip to 2” at the top.MADE IN THE USA
Gold Digger Beach Pouch w/Zippers
Gold Digger Beach Pouch w/Zippers
$28.00
Gold Digger Beach Pouch w/Zippers Rugged construction Submersible Great for beach, snorkeling, or land adventures Multiple compartments Mesh lining for easy draining Designed & developed by Ronnie DeGhetto