- Home
- Detecting Adventures All
Detecting Adventures All
Ugly Box Electrolysis Unit - coin and relic cleaner + stabilizer * New & Improved
electrolysis unit

Ugly Box Electrolysis Unit - coin and relic cleaner + stabilizer * New & Improved
$109.00
High quality coin & relic cleaner + stabilizer New improved design - single power source New improved design -battery lasts longer Applications for metal detecting, archaeology digs, restoration, historic artifacts, and museum collections Research, development and tested in collaboration with university Increase value of your fin...
Snake Skinz Custom Coil Wire Sleeves for the Minelab Equinox series and Nokta Simples and Legend Series.
Accessory

Snake Skinz Custom Coil Wire Sleeves for the Minelab Equinox series and Nokta Simples and Legend Series.
$9.25
Snake Skinz Custom Coil Wire Sleeves For Your Metal Detector. Create a distinctive look for your metal detector! A unique vibe that sets you apart from the crowd. Also a great way to keep track of your machine when detecting with groups or at hunts. Compatible with: The Kruzer, Anfibio, Simplex and Equinox Series Metal Detectors. Easy to Inst...

The Ugly Book by DA Frank Lopergolo
$18.45
*** Now shipping ***Filled with life experiences and quirky stories, The Ugly Book is a comprehensive guide on the use of the Ugly Box written by renown Treasure Hunter Frank Lopergolo. Frank worked with a local University to develop an Electrolysis unit that stops the deterioration of metal objects dug out of the ground and preserve them for ye...

Minelab Equinox 11" Coil Support
$10.95
Minelab Equinox coil support for the 11” stock. As you may know the ears of the Equinox coils can sometime snap off the coil if pressure is put on the coil when getting up off the ground after digging your hole. A slight tweak and snap your coil is trash. To replace the stock 11” coil it will cost $229. Our coil supports are custom made to fit ...

UGLY BOX 12 Volt Wall Charger
$20.00
UL approved 12 volt wall charger for the Ugly Box T.N.T.

Dan's Laynards, Lanyard (red, orange, slate blue, and black) - 36"
$16.00
Lanyards – extends to 36” High quality hardware + construction Never “misplace” your pinpointer again Connects in seconds Durable design keeps pinpointer visible even if dropped An affordable “insurance policy” for your pinpointer

Detecting Adventures Beach Pouch w/Zippers
$28.00
Detecting Adventures Beach Pouch w/Zippers Proud to be made in America.
Detecting Adventure 8" T-Rex Stainless Steel Sand Scoop with 3/8" Honey comb holes
Sand Scoop

Detecting Adventure 8" T-Rex Stainless Steel Sand Scoop with 3/8" Honey comb holes
$239.00
The T-REX bucket is approximately 11” long by 8” wide and 4 7/8” deep. The top of the scoop is 5” deep to prevent targets from being knocked out of the scoop while hunting in the surf. On the top of the scoop is a tube to attach your handle. The Handle tube is angled at about 20 degrees so digging is easier than with a straight up and down ...

Minelab Equinox 15" Coil Support
$11.75
Minelab Equinox coil support for the 15” coil. As you may know the ears of the Equinox coils can sometime snap off the coil if pressure is put on the coil when getting up off the ground after digging your hole. A slight tweak and snap your coil is trash. To replace the 15" coil it will cost $239. Our coil supports are custom made to fit exact t...

Minelab Equinox Replacement Arm Cuff by Owl Engineering
$35.00
"Arm Cuff" Upgrade Kit for the Equinox (re-designed, now all aluminum) An excellent solution to replace broken Equinox Arm Cuffs. Be pro-active and buy now before your detector is out of commission. Powder coated aluminum with stainless steel fasteners which eliminate the problem of the brass insert that freezes due to salt water. Direct fit, ...

Carbon Fiber Handle for T-Rex Sand Scoops. 46.5 inches
$135.00
Ultra-light, ultra-strong rugged construction. East to install. Includes securing bold and nut. 46.5”
Detecting Adventures T-Rex Stainless Steel 9.5" With 3/8th Inch Honeycomb Holes
Sand Scoop

Detecting Adventures T-Rex Stainless Steel 9.5" With 3/8th Inch Honeycomb Holes
$259.00
The T-REX bucket is approximately 11” long by 9 1/2” wide and 4 7/8” deep. The top of the scoop is 5” deep to prevent targets from being knocked out of the scoop while hunting in the surf. On the top of the scoop is a tube to attach your handle. The Handle tube is angled at about 20 degrees so digging is easier than with a straight up and down h...

Aqua-Tek Waterproof Headphones for Equinox
$159.00
Aqua Tek headphones are designed for comfort and fit. 200 '+ Depth Rating Conical speakers for Deep Rich Tones High Quality Minelab approved Connector by Holin MFG. Cords and Wire Made in USA Perfect for Land, Snorkeling and Diving 2 Year Warranty Compatible with VM08 Wireless Module

Thresher Submersible Headphones for Minelab Equinox
$159.00
Designed for comfort and fit. These headphones are made of the highest quality materials and best of all the are Made in the USA. 200'+ Depth Rating Oversized Speaker Elements for Deep Rich Tone High Quality Minelab Approved Connectors by Holin MFG Cords and Wires are Made in the USA Perfect for Land, Snorkeling & Diving Assembled in the US...

Detecting Adventure Shaft Mount Pinpointer Holder
$14.75
Detecting Adventure Shaft Mount Pinpointer HolderThis pinpointer holder will fit standard round detector shafts 7/8” diameter. It is designed to fit Deus, Garrett, and Land or Sea pinpointer. Also, any cylindrical pinpointer which tapers from 3/4” at the tip to 2” at the top.MADE IN THE USA

Minelab 6" Coil Support by Detecting Adventure
$11.75
Minelab Equinox coil support for the 6” stock coil. As you may know the ears of the Equinox coils can sometime snap off the coil if pressure is put on the coil when getting up off the ground after digging your hole. A slight tweak and snap your coil is trash. To replace the stock 6” coil it will cost $179. Our coil supports are custom made to ...

Thresher Submersible Headphones for Deus II
$165.00
Designed for comfort and fit. These headphones are made of the highest quality materials and best of all the are Made in the USA. Important: Because of the higher volume available, these headphonesare designed to operate in the BH01 (Bone Conduction) mode only. 200'+ Depth Rating Oversized Speaker Elements for Deep Rich Tone High Quality Minel...

Gold Digger Beach Pouch w/Zippers
$28.00
Gold Digger Beach Pouch w/Zippers Rugged construction Submersible Great for beach, snorkeling, or land adventures Multiple compartments Mesh lining for easy draining Designed & developed by Ronnie DeGhetto

T-Rex 6.5" Stainless Steel with 3/8" Honey Comb Holes by Detecting Adventure
$219.00
The T-REX bucket is approximately 11” long by 6.5" wide and 4" deep. The top of the scoop is 5” deep to prevent targets from being knocked out of the scoop while hunting in the surf. This scoop has 1/4" round holes 2" from the back and bottom of the scoop to catch small items. On the top of the scoop is a tube to attach your handle. The Handl...

Stork Leg Carbon Fiber Shaft for Minelab Equinox by Owl
$145.00
Glides through the water like you have never experienced. Light, strong and rigid Only .40 pounds Mounts directly to the upper handle of your Equinox 600 or 800. The mid-section is attached with the included Stainless 1/4-20 Hex screw for rigidity. The lower tear drop shaped rubber washers are larger than the original Minelab. ...

Aqua Tek Waterproof Headphones for the Deus II
$165.00
Aqua Tek headphones are designed for comfort and fit. 100 '+ Depth Rating Conical speakers for Deep Rich Tones High Quality Minelab approved Connector by Holin MFG. Cords and Wire Made in USA Perfect for Land, Snorkeling and Diving 2 Year Warranty

Stork Leg Carbon Fiber Shaft for Minelab Excalibur by Owl
$95.00
Universal Stork Leg Kit For Minelab, Anderson,Plugger and other handles. Glides through the water like you have never experienced. Light, strong and rigid Weights only 5 ounces Bolts (for maximum rigidity) directly to your Excalibur with the supplied Stainless screws, with our without the plastic knobs. Included is colored knob/screw w...

Shelling bags. Reinforced nylon. Available in three unique design. 12"X13”
$24.95
Beautiful design, made in the USA with reinforced construction, this premiere shelling bag has two pockets, large mesh for instant draining, and front pocket for valuables. High quality construction, made to last.

CTX 3030 Coil Support for 17" coil by Detecting Adventure
$13.11
Minelab CTX 3030 coil support for the 17” coil. As you may know the ears of the CTX 3030 coils can sometime snap off the coil. A slight tweak and snap your coil is trash. To replace the 17” coil it will cost $399!. Our coil supports are custom made to fit exact to each size coil. Not one size fits all like many other brands. *Disclaimer* This...

Thresher Submersible Headphones for Minelab CTX
$169.00
Designed for comfort and fit. These headphones are made of the highest quality materials and best of all the are Made in the USA. 200'+ Depth Rating Oversized Speaker Elements for Deep Rich Tone High Quality Minelab Approved Connectors by Holin MFG Cords and Wires are Made in the USA Perfect for Land, Snorkeling & Diving Assembled in the U...

Aqua Tek Waterproof Headphones for Minelab CTX
$169.00
Aqua Tek headphones are designed for comfort and fit. New waterproof speaker allow the user to hear pitches(tones) between targets for better target separation. 200 '+ Depth Rating NEW Conical speakers for Deep Rich Tones High Quality Minelab approved Connector by Holin MFG. Cords and Wire Made in USA Perfect for Land, Snorkeling and Diving 2 Y...

Ugly Box Carbon Gator
$15.00
Carbon-Gator Ugly Box anode wire isolator. This will prevent wire breakdown due to the electrolysis process.

CTX 3030 Coil Support for 11" coil by Detecting Adventure
$10.75
Minelab CTX 3030 coil support for the 11” coil. As you may know the ears of the CTX 3030 coils can sometime snap off the coil. A slight tweak and snap your coil is trash. To replace the 11” coil it will cost $349!. Our coil supports are custom made to fit exact to each size coil. Not one size fits all like many other brands. *Disclaimer* This...

Aqua-Tek Waterproof Headphones for Garrett AT Series metal detectors
$165.00
Designed for comfort and fit. These headphones are made of the highest quality materials and best of all the are Made in the USA. 200'+ Depth Rating Oversized Speaker Elements for Deep Rich Tone High Quality Minelab Approved Connectors by Holin MFG Cords and Wires are Made in the USA Perfect for Land, Snorkeling & Diving Assembled in the U...

Thresher Submersible Headphones for the Garrett AT Series metal detectors
$165.00
Designed for comfort and fit. These headphones are made of the highest quality materials and best of all the are Made in the USA. 200'+ Depth Rating Oversized Speaker Elements for Deep Rich Tone High Quality Minelab Approved Connectors by Holin MFG Cords and Wires are Made in the USA Perfect for Land, Snorkeling & Diving Assembled in the U...

Garrett AT series reinforced coil support for 11X8.5 coil
$12.50
Garrett AT series reinforced coil support brackets for 11X8.5 coilPrevents snapping off of coil support ears under normal usage.