- Home
- Products
Products

Raptor Pull Handle
$15.00
The RAPTOR handles were designed with the serious beach hunter in mind! We used a lightweight engineered thermoplastic (found in M16 rifles) for maximum strength and durability. All Raptor handles have a LIFETIME WARRANTY! The Raptor Pull Handle: helps when digging out those deep targets where your whole scoop is in the wet sand gives you the ...

Relic Quest: A Guide To Responsible Relic Recovery Techniques With Metal Detecto
$19.95
Relic Quest is a must-have reference book for the relic hunter that teaches the basics of metald detectors and searchcoils, hunting techniques, proper research and recovery methods. It contains practical advice for how to locate productive relic sites and how to perform field reconnaissance of a site. Areas of hunting focus include Civil War, ...

RPG Stereo Headphones PH-100R
$49.95
RPG Stereo Headphones with 1/4" jack. Dual volume controls. PN:3011-0181

RTG 28 by 5/8 Stainless Steel Sand Scoop #SS-285
$70.00
This scoop bucket is made with 16 gauge non-magnetic stainless steel with 5/8" holes punched throughout. The bucket is 7" long by 5" in diameter. The 7/8" stainless steel 28" long handle has a soft rubber hand grip for comfort. This durable stainless steel beach scoop weighs just a little more than 2-1/2 pounds. We offer a 90 day limited warrant...

RTG 33" Stainless Steel Sand Scoop #SS-33
$65.00
The scoop is made with 16 gauge 304 non-magnetic stainless steel. The 1/2" heavy wire welded screen is brazed onto the scoop to make a quick sand sifting basket. The handle is made of 3/4" stainless steel; it has a rubber hand grip for comfort. An excellent scoop in dry sand. The overall length is 33" - weight is less than four pounds. Made in ...

RTG Aluminum 5" Pro Mini Travel Water Sand Scoop #SS-733TRVL
$132.00
The scoop handle comes apart at the middle for traveling purposes. The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of the sand scoop is 5" in diameter by 9" long. The aluminum 1-1/4" diameter handle is welded at a 20 degree angle so you can use your foot on the back of this scoop to push i...

RTG Aluminum 5" Pro Mini Water Sand Scoop #SS-733
$115.00
The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of the sand scoop is 5" in diameter by 9" long. The 1-1/4" diameter aluminum handle is welded at 20 degrees so you can use your foot on the back of this scoop to push it into the sand. There is a reinforced aluminum brace which gives this ext...

RTG Aluminum 5" Sand Scoop #SS-721
$38.50
This is our lightweight and easy to use scoop. The aluminum bucket has 5/8' diameter holes punched into the sides and the back of the scoop. The bucket of the sand scoop is 5" in diameter by 7" long. The anodized handle is welded to the top of the sand scoop. The handle has a curve in it for easy digging and has an orange rubber hand grip for co...

RTG Aluminum 6 " Pro Travel Water Sand Scoop #SS-BB6TRVL
$160.00
It is a lightweight shallow water and beach scoop. The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of the sand scoop is 6" in diameter by 11" long. The aluminum 1-1/4" diameter handle is welded to the top of at a 20 degree so you can use your foot on the back of this scoop to push it into ...

RTG Aluminum 6" Pro Water Sand Scoop #SS-BB6
$145.00
The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of the sand scoop is 6 " in diameter by 11" long. The aluminum 1-1/4" diameter handle is welded at a 20 degree angle so you can use your foot on the back of this scoop to push it into the sand. There is a T-top reinforced aluminum brace to gi...

RTG Aluminum 6" Pro Water Sand Scoop with Screen #SS-6SCR
$159.95
The aluminum bucket has 5/8" diameter holes punched into the sides; the bottom is made of 1/2" heavy duty welded screen with a 1/4' protective curved bar for a foot plate. The bucket of the sand scoop is 6 " in diameter by 11" long. The aluminum 1-1/4" diameter handle is welded at a 20 degree angle so you can use your foot on the back of this sc...

RTG Aluminum 6" Pro Water Sand Scoop with Stainless Steel Tip #SS-6TIP
$162.00
This scoop is the same as our Pro Aluminum 6" scoop with an added stainless steel tip on the end of the scoop. The tip is made of 16 gauge non-magnetic stainless steel. This lightweight shallow water and beach scoop has 5/8' diameter holes punched into the sides and the back of the scoop. The aluminum bucket of the sand scoop is 6 " in diameter ...

RTG Aluminum Big 6" Sand Scoop #SS-BIG6
$44.95
This sand scoop weighs just about 1 pound. The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of the sand scoop is a little over 6" in diameter by 8" long. The anodized handle is welded to the top of the sand scoop. The handle has a curve it in for easy digging and has a rubber hand grip for ...

RTG Aluminum Pro 5" Sand Scoop #SS-723
$40.00
The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of the sand scoop is 5" in diameter by 9" long. The anodized handle is welded to the top of the sand scoop. The handle has a curve in it for easy digging and has an orange rubber grip for comfort. This ultra lightweight sand scoop weighs abou...

RTG Aluminum Pro Drag 5" Sand Scoop #SS-724
$45.00
It is a lightweight “drag towards you style” sand scoop for easy digging into the sand. The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of the sand scoop is 5'"in diameter by 9" long. The 12” anodized handle is welded to the sand scoop making the overall scoop about 18'. The handle has an ...

RTG Aluminum Straight 5" Sand Scoop #SS-STR
$93.00
This scoop has a fixed 36" long straight anodized aluminum handle with a rubber grip for comfort. The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of this heavy gauged sand scoop is 5" in diameter by 7" long. There is an aluminum bracket welded to the bucket and handle for added strength. O...

RTG Galvanized 12/5 Sand Sifter Quick Drain Sand Scoop #SS-951
$50.00
This sand scoop has a fixed 12" long handle. The 5" diameter basket is made with 16 gauge steel. The handle is made of 3/4" galvanized conduit. A rubber hand grip is placed on the handle for comfort. Overall length is 17" long. Weighs less than 1.5 pounds. An excellent wet or dry sand scoop. Made in the U.S.A. We offer a 90 day limited warrant...

RTG Galvanized 28/5" Quick Drain Sand Scoop #SS-703
$51.00
Another popular sand scoop we build has a fixed 28" long handle. This scoop has a 5" diameter basket and is made of 16 gauge. steel tubing. The handle is made of 3/4" galvanized conduit. A rubber hand grip is attached to the handle for comfort. This scoop is designed for dry beach hunting only! Overall length is 33" long. Weighs less than two ...

RTG Galvanized 5" Beach Master Water Scoop #SS-700
$117.00
This 5” scoop is made of 14 gauge galvanized steel and 1/2" heavy welded wire screen. A “U-shaped” flat bar is brazed around the outside of the screen for support and to eliminate the possibility of crushing the basket. There is also a support bracket to give additional strength. The handle is 40" long with a rubber hand grip. A very durable, li...

RTG Galvanized 5" Buccaneer Quick Drain Sand Scoop #SS-706
$50.00
This sand scoop's sifting basket is 5" in diameter. Strong 1/2" wire welded screen is brazed to the bucket. The handle is 14" long & brazed to the bucket at a 20 degree pull angle. This angle makes it easy to dig in sand. A soft rubber hand grip is placed at the end of the handle for comfort. A great scoop to use in both wet and dry sand. ...

RTG Galvanized Deluxe Adjustable 4" Quick Drain Sand Scoop #SS-701
$65.00
Mfg. ID: SS-701This is our 2-in-1 deluxe beach scoop. This scoop can be used as an adjustable long handled scoop or it can be separated into a 9” hand scoop. The long handle slides into the short handle & is secured with a spring clip. The long handle has 4 adjustable positions. These handles are made of anodized aluminum. There are rubber h...

RTG Galvanized Deluxe Adjustable 5" Quick Drain Sand Scoop #SS-702
$69.95
It is a 2-in 1 sand scoop. This scoop can be used as an adjustable long handled scoop or it can be separated into a 9” hand scoop. The long handle slides into the short handle and is secured with a spring clip. The long handle has 4 adjustable positions. These handles are made of anodized aluminum. There are rubber hand grips on both handles. ...

RTG Galvanized Kaptain Hook 5" Quick Drain Sand Scoop #SS-KPTNHOOK
$45.00
The Kaptain Hooks sand scoop’s sifting basket is 5" in diameter. Strong 1/2" wire welded screen is brazed to the bucket. The handle is 8" long & brazed to the bucket at a 20° pull angle. This angle makes it easy to dig in sand. A soft rubber hand grip is placed at the end of the handle for comfort. Easy to use and lightweight. Made in the ...

RTG Galvanized Moose 5" Sand Scoop #SS-Moose
$45.00
This sand scoop is made with a fixed 8" short handle. The scoop has a 5" diameter basket and is made of 16 ga. steel tubing. The handle is made of 3/4" galvanized conduit. A rubber hand grip is attached to the handle for comfort. An excellent scoop in both wet and dry sand. Overall length is just a little over 13" long. Made in the U.S.A. We a...

RTG Galvanized Privateer 5" Quick Drain Sand Scoop #SS-755
$49.00
This sand scoop has a 24” long handle. The sifting basket is 5' in diameter and made with strong ½” wire welded screen. The 24” handle is brazed to the bucket at a 20° angle - this angle makes it easy to dig in sand. The handle has a soft rubber hand grip for comfort. Easy to use and lightweight. Made in the U.S.A. We offer a 90 day limited warr...

RTG Galvanized Sand n' Sifting 4 "Quick Drain Sand Scoop #SS-SANDSIFT
$43.00
This sand sifting scoop’s basket is 4" in diameter. Strong 1/2" wire welded screen is brazed to the bucket. The handle is 8" long and brazed to the bucket at a 20° angle. This angle makes it easy to dig in the sand. A soft rubber hand grip is placed at the end of the handle for comfort. Easy to use and lightweight. Made in the U.S.A. We offer a ...

RTG Galvanized Shorty 4" Quick Drain Sand Scoop #SS-SHORTY
$43.00
Compact and strong. This scoop is made with a fixed 8'"short handle. The scoop has a 4" diameter basket and is made of 16 gauge steel tubing. The handle is made of 3/4" galvanized conduit. A rubber hand grip is attached to the handle for comfort. An excellent scoop in both wet and dry sand. Overall length is 12" long. Weighs around one pound. Ma...

RTG Galvanized Super 4 " Quick Drain Sand Scoop SS# SUPER 4
$43.00
Mfg. ID: #SS-SUP4This is our durable 4" diameter sand scoop made of 16 gauge steel and strong 1/2" wire welded screen. A soft rubber hand grip is placed on the handle for extreme comfort. It is made to sift sand super fast. Easy to use and very lightweight. Made in the U.S.A. We offer a 90 day limited warranty against manufacturing defects.

RTG Galvanized Super 5" Quick Drain Sand Scoop #SS-SUP5
$47.95
Mfg. ID: SS-SUP5This is our durable 5" diameter sand scoop made of 16 gauge steel and strong 1/2" wire welded screen. A soft rubber hand grip is placed on the handle for extreme comfort. It is made to sift sand super fast. Easy to use and very lightweight. An excellent sand scoop in both wet and dry sand. This scoop is one of our most popular ha...

RTG Stainless Steel 5" Mini Sand Scoop #SS-709MINI
$160.00
Mfg ID: SS-709MINIThe scoop is made with 14 gauge 304 non-magnetic stainless steel with either 1/2' or 5/8' holes punched throughout the bucket. The handle is also stainless steel. The scoop bucket is approximately 9' long by 5' in diameter. The round stainless bracket is welded to the bucket and handle for strength and for use as a foot kicke...

RTG Stainless Steel 5" Mini Travel Water Sand Scoop #SS-709MINITRVL
$175.00
Mfg. ID: SS-709MINITRVLThe 2 piece handle has a stainless sleeve insert with a spring clip to hold the handles together. This scoop is made with 14 gauge 304 non-magnetic stainless steel with either 1/2' or 5/8' holes punched throughout the bucket. The handle is stainless steel with a rubber hand grip for comfort. The scoop bucket is approximate...

RTG Stainless Steel 5" Mini Water Sand Scoop w/ handle #SS-711
$165.00
Mfg. ID: SS-711This scoop is made with 14 gauge 304 non-magnetic stainless steel with either 1/2' or 5/8' holes punched throughout the bucket. The handle is also stainless steel. The scoop bucket is approximately 9' long by 5' in diameter. There is a round stainless bracket welded to the bucket and the handle for support and for use as a foot ...

RTG Stainless Steel Monster 6" Water Sand Scoop #SS-709MONSTER
$169.00
Mfg. ID: SS-709MONSTERThe bucket is made 14 gauge 304 stainless steel with 5/8' holes punched through out the bucket. The 1-1/4' diameter handle is also stainless steel. The scoop bucket is almost 11' long by 6' in diameter. There is a 1' stainless steel brace welded to the top of the scoop for bucket added strength. There is a round stainless...

RTG Stainless Steel Royal 5" Water Sand Scoop #SS-RYL
$165.00
Mfg. ID: SS-RYLThe bucket is made of 304 stainless steel with 5/8' holes punched through out the bucket. The handle is also stainless steel. The scoop bucket is almost 11" long by 5-1/2" in diameter. The bucket is 14 gauge stainless steel. There is a round stainless tubing welded on the back of the bucket to the handle for strength and for a f...

RTG Zinc Dicromate Steel Sand Scoop #SS-223
$37.95
Mfg. ID: SS-223This scoop has 3/8” square punched holes through-out the body. The design aids sand in sifting out of the bucket for fast recovery of targets. The comfortable rubber grip gives firm purchase even when wet. Bucket size is 6”x 10” and is made of zinc dicromate.

Shallow Water Metal Detecting: Lessons From The Pros By Clive James Clynick
$13.95
Clive James Clynick is the author of ten previous treasure hunting books and numerous articles. In this detailed and informative book Mr. Clynick draws on his 30 years of detecting experience and that of top pros worldwide to produce this advanced guide for the serious water and shoreline treasure hunter. Topics include: • Pro-level equipment ...

Shelling bags. Reinforced nylon. Available in three unique design. 12"X13”
$24.95
Beautiful design, made in the USA with reinforced construction, this premiere shelling bag has two pockets, large mesh for instant draining, and front pocket for valuables. High quality construction, made to last.
Shoreline Treasure Hunting with the Minelab Excalibur by Clive James Clynick
Publication

Shoreline Treasure Hunting with the Minelab Excalibur by Clive James Clynick
$13.95
Description Clive James Clynick is the author of twelve previous treasure hunting books and numerous articles. In this detailed and informative book Mr. Clynick shares his thirty-plus years of shoreline detecting experience to produce this advanced guide to successful treasure hunting with the Minelab Excalibur. Topics include:• Modifications...
Site-Reading for Gold and Silver: Understanding Beach Shore And Inland Metal Detecting Sites By Clive James Clynick
Publication

Site-Reading for Gold and Silver: Understanding Beach Shore And Inland Metal Detecting Sites By Clive James Clynick
$13.95
Description By Clive James ClynickThese proven methods for choosing, assessing and examining treasure hunting locations will help you to become a more accurate and effective treasure hunter. Topics include:· “Site-reading” for gold.· “Guesstimating” the potential of sites based upon key factors.· Recognizing “hotspots” within sites.· Versatili...

Snake Skinz Custom Coil Wire Sleeves
$9.25
Snake Skinz Custom Coil Wire Sleeves For Your Metal Detector. Create a distinctive look for your metal detector! A unique vibe that sets you apart from the crowd. Also a great way to keep track of your machine when detecting with groups or at hunts. Compatible with: The Kruzer, Anfibio, Simplex and Equinox Series Metal Detectors. Easy to Inst...

SP24 9.5" x 5" DD Coil for the Nokta Simplex+ Metal Detector
$109.65
Simplex SP24 CoilDescription : Waterproof DD Search CoilSize : 24x13 cm / 9.5"x5" Including coil cover and coil mounting hardware. Part Number : 17000168
Steve's Detector Rod for Minelab Equinox 600/800 Complete Black Carbon-Fiber Shaft System with End Cap
Shaft Hardware

Steve's Detector Rod for Minelab Equinox 600/800 Complete Black Carbon-Fiber Shaft System with End Cap
$129.00
BRAND NEW!!!Our "standard" complete shaft for the Minelab Equinox includes one standard-length (26") lower rod (with spring button, for compatibility with the Minelab stock shaft), along with our standard upper shaft. The upper shaft includes 4 cuff-adjustment holes, and one hole for the control-box handle (in the same positions as the stock Min...
Steve's Detector Rod for Minelab Equinox 600/800 Complete Red/ Black Carbon Shaft System with End Cap
Shaft Hardware

Steve's Detector Rod for Minelab Equinox 600/800 Complete Red/ Black Carbon Shaft System with End Cap
$149.00
Our "standard" complete shaft for the Minelab Equinox includes one standard-length (26") lower rod (with spring button, for compatibility with the Minelab stock shaft), along with our standard upper shaft. The upper shaft includes 4 cuff-adjustment holes, and one hole for the control-box handle (in the same positions as the stock Minelab shaft)....
Steve's Detector Rods Minelab Equinox 600/800 Black Carbon-Fiber Lower Shaft
Shaft Hardware

Steve's Detector Rods Minelab Equinox 600/800 Black Carbon-Fiber Lower Shaft
$77.99
BRAND NEW!!!Our lower rods for the Minelab Equinox are slightly longer than the factory rods, but with the spring button clip located at the same position (22 3/4" from the end of the rod) as on the factory rod. This design allows a slightly longer section of the lower rod to remain inserted in the middle rod, as compared to the factory rod, w...
Steves Detector Rods Carbon Fiber Upper Shaft for Minelab Equinox 600/800 Black with End Cap
Shaft Hardware

Steves Detector Rods Carbon Fiber Upper Shaft for Minelab Equinox 600/800 Black with End Cap
$79.00
BRAND NEW!!!Our standard upper shaft for the Minelab Equinox includes 4 cuff-adjustment holes, and one hole for the control-box handle (in the same positions as the stock Minelab shaft). The shaft also includes a heavy duty, adjustable, removable clamping cam lock, and a rubber end cap. One piece construction eliminates wobble. Specifications: ...
Steves Detector Rods Carbon Fiber Upper Shaft for Minelab Equinox 600/800 Red/Black with End Cap
Shaft Hardware

Steves Detector Rods Carbon Fiber Upper Shaft for Minelab Equinox 600/800 Red/Black with End Cap
$89.00
Our standard upper shaft for the Minelab Equinox includes 4 cuff-adjustment holes, and one hole for the control-box handle (in the same positions as the stock Minelab shaft). The shaft also includes a heavy duty, adjustable, removable clamping cam lock, and a rubber end cap. One piece construction eliminates wobble. Specifications: Shaft Lengt...

Stork Leg Carbon Fiber Shaft for Minelab Equinox by Owl
$145.00
Glides through the water like you have never experienced. Light, strong and rigid Only .40 pounds Mounts directly to the upper handle of your Equinox 600 or 800. The mid-section is attached with the included Stainless 1/4-20 Hex screw for rigidity. The lower tear drop shaped rubber washers are larger than the original Minelab. ...

Stork Leg Carbon Fiber Shaft for Minelab Excalibur by Owl
$95.00
Universal Stork Leg Kit For Minelab, Anderson,Plugger and other handles. Glides through the water like you have never experienced. Light, strong and rigid Weights only 5 ounces Bolts (for maximum rigidity) directly to your Excalibur with the supplied Stainless screws, with our without the plastic knobs. Included is colored knob/screw w...