Products

ANDERSON 1/4" x 1.5" Coil Bolt Set
$9.99
Fits Most Fisher, X-Terra and Tesoro Machines. 10 Pieces 3/8" x 1 1/2" Coil Bolt Set PN: 2002

ANDERSON 1/4" x 2" Coil Bolt Set
$9.99
Fits Minelab Excalibur. 10 Pieces PN: 2004

ANDERSON 3/8" x 2" Coil Bolt Set
$9.99
Fits Garrett Water Machines. 10 Pieces 3/8" x 2" Coil Bolt Set PN:2003

ANDERSON Chest Mount for Excalibur Metal Detectors
$59.99
The Excalibur Chest Mount system is the most versatile Excalibur mount on the market. It has been designed to provide almost unlimited adjustability. The horizontal belt can be worn at the waist or it can be adjusted to be up on the chest. The waist and shoulder straps are fully adjustable. Made from 1.5" Polypro Webbing with black powder coated...

ANDERSON EXCALIBUR KNOB GUARD : Excalibur and Excalibur II - Green
$39.99
Anderson Excalibur Aluminum Knob Guard. Great way to protect your detector control knobs. Comes with mounting hardware and instructions. PN:0916G

ANDERSON EXCALIBUR KNOB GUARD : Excalibur and Excalibur II - Yellow
$39.99
Anderson Aluminum Excalibur Knob Guard. Great way to protect your detector control knobs. Comes with mounting hardware and instructions. PN:0916Y

ANDERSON LOWER ROD SHIM KIT 3/8" x.020" and 1/4" x.020" Shim Kit
$9.99
Anderson Lower Rod Shim Kit 3/8"x.020" and 1/4" x .020" Shim Kit. 12 Pieces PN:2006

ANDERSON ULTIMATE ARM CUFF w/ 2 inch Adjustable Arm Strap
$39.99
Anderson Ultimate Arm Cuff-0913 The Anderson Ultimate Arm Cuff is made from high quailty aluminum with a sandtext black powder coat finish. Cuff also has foam pad on the inside and a 2" adjustable arm strap. Comes with black hardware. This will fit most makes and models with a 7/8" detector shafts

Aqua Tek Waterproof Headphones for Minelab CTX
$169.00
Aqua Tek headphones are designed for comfort and fit. New waterproof speaker allow the user to hear pitches(tones) between targets for better target separation. 200 '+ Depth Rating NEW Conical speakers for Deep Rich Tones High Quality Minelab approved Connector by Holin MFG. Cords and Wire Made in USA Perfect for Land, Snorkeling and Diving 2 Y...

Aqua-Tek Waterproof Headphones for Equinox (YELLOW ONLY)
$159.00
Aqua Tek headphones are designed for comfort and fit. 200 '+ Depth Rating Conical speakers for Deep Rich Tones High Quality Minelab approved Connector by Holin MFG. Cords and Wire Made in USA Perfect for Land, Snorkeling and Diving 2 Year Warranty Compatible with VM08 Wireless Module Yellow only

DetectorPro Keeper Lanyard
$10.00
Never “misplace” your probe again.Connects in seconds to your Pro Pointer.Low resistance lanyard for easy unobstructed use.Durable design keeps the probe visible even if dropped.An affordable “insurance policy” for your quality probe.Lifetime Warranty! Pin Pointer not included Listing and template services provided by inkFrog

Equinox Armrest Kit
$20.00
Replacement Armrest for Equinox. Kit includes: Upper and Lower Armrest, bolt and Strap. PN: 3011-0385

Garrett 4 Cell 1.5 AA Battery Holder for AT Series
$6.95
Compatible with Garrett AT PRO, AT GOLD, GTA, GTAx, GTX, GTP or Garrett GTI Metal Detectors. Holds 4 AA Batteries.

Garrett Nut and Bolt w/Washers
$6.25
Includes Coil Mounting Screw and Washers for all Garrett metal detectors. PN: 2333300

Minelab 11 Inch Coil Cover for FBS
$18.00
Fits CTX 3030 and other FBS 11 inch coil. Compatible: CTX 3030 E-TRAC, Safari, Explorer SE Pro, Explorer SE, Explorer II, Quattro MP, Explorer XS and Explorer S PN: 3011-0154 Listing and template services provided by inkFrog

Minelab 11 Inch Round DD Coil for CTX 3030
$349.00
The standard coil supplied with the CTX 3030. It is robust yet lightweight, offers great depth, sensitivity and excellent target separation. Coil is waterproof. Coil selection basics- When choosing a coil there are a few basics to remember that relate to the size, shape, configuration and frequency of the coil. Size- The size of a coil can infl...

Minelab 6 Inch DD Coil for CTX 3030
$299.00
Very sensitive to small targets, and perfect for finding treasure in high trash areas. It is also ideal for maneuvering in difficult terrain. Coil is waterproof PN:3011-0114

Minelab 6" Coil Cover for CTX 3030 or Equinox Smart Coil
$10.00
Minelab 6" custom fit Coil Cover for CTX 3030 or Equinox smart PN: 3011-0135

Minelab 6" DD Coil for Equinox 600/800
$179.00
The waterproof 6-inch round Double-D coil is very sensitive to small targets, and perfect for finding treasure in high trash areas. It is also ideal for detecting in difficult terrain. A protective skidplate is included. Part No. 3011-0333
Minelab CTX 3030 Standard Carbon-Fiber Lower Rod by Steve's Detector Rods (32 inches)
Shaft Hardware

Minelab CTX 3030 Standard Carbon-Fiber Lower Rod by Steve's Detector Rods (32 inches)
$89.00
Our lower rods designed for the CTX 3030 are an affordable alternative to the factory lower rods. These rods are the same length and diameter as the original Minelab hardware. However, several improvements have been carefully engineered into them, including the opening for the coil cable being moved to the right-hand side of the rod in our desig...

Minelab Pro-Swing 45 Harness
$129.00
Go weightless detecting with PRO-SWING 45! Increase your detecting time with the PRO-SWING 45 featuring Minelab's innovative W8 distribution system. PN: 3011-0245 Listing and template services provided by inkFrog

Minelab Tool and Trash Pouch
$33.00
Minelab Canvas Treasure Pouch PN:3011-0163

Minelab Vanquish Carry Bag
$24.00
This carry bag is designed to fit the Minelab Vanquish 540, 440 and 340 metal detectors. UNIQUE DESIGN: Designed to safely carry your VANQUISH metal detector. DURABLE CONSTRUCTION: Rugged design protects your detecting equipment during transport to and from the hunt. VERSATILE CARRYING CAPABILITY: Adjustable shoulder strap & additional...

Nokta-Makro 1/4" Headphone Adapter
$25.99
Compatible with models: Simplex+ Anfibio Kruzer Gold Kruzer TMD-101 PN:170000731
Snake Skinz Custom Coil Wire Sleeves for the Minelab Equinox series and Nokta Simples and Legend Series.
Accessory

Snake Skinz Custom Coil Wire Sleeves for the Minelab Equinox series and Nokta Simples and Legend Series.
$9.25
Snake Skinz Custom Coil Wire Sleeves For Your Metal Detector. Create a distinctive look for your metal detector! A unique vibe that sets you apart from the crowd. Also a great way to keep track of your machine when detecting with groups or at hunts. Compatible with: The Kruzer, Anfibio, Simplex and Equinox Series Metal Detectors. Easy to Inst...
Steve's Detector Rod for Minelab Equinox 600/800 Complete Black Carbon-Fiber Shaft System with End Cap
Shaft Hardware

Steve's Detector Rod for Minelab Equinox 600/800 Complete Black Carbon-Fiber Shaft System with End Cap
$129.00
BRAND NEW!!!Our "standard" complete shaft for the Minelab Equinox includes one standard-length (26") lower rod (with spring button, for compatibility with the Minelab stock shaft), along with our standard upper shaft. The upper shaft includes 4 cuff-adjustment holes, and one hole for the control-box handle (in the same positions as the stock Min...
Steve's Detector Rod for Minelab Equinox 600/800 Complete Red/ Black Carbon Shaft System with End Cap
Shaft Hardware

Steve's Detector Rod for Minelab Equinox 600/800 Complete Red/ Black Carbon Shaft System with End Cap
$149.00
Our "standard" complete shaft for the Minelab Equinox includes one standard-length (26") lower rod (with spring button, for compatibility with the Minelab stock shaft), along with our standard upper shaft. The upper shaft includes 4 cuff-adjustment holes, and one hole for the control-box handle (in the same positions as the stock Minelab shaft)....
Steve's Detector Rods Minelab Equinox 600/800 Black Carbon-Fiber Lower Shaft
Shaft Hardware

Steve's Detector Rods Minelab Equinox 600/800 Black Carbon-Fiber Lower Shaft
$77.99
BRAND NEW!!!Our lower rods for the Minelab Equinox are slightly longer than the factory rods, but with the spring button clip located at the same position (22 3/4" from the end of the rod) as on the factory rod. This design allows a slightly longer section of the lower rod to remain inserted in the middle rod, as compared to the factory rod, w...

Stork Leg Carbon Fiber Shaft for Minelab Equinox by Owl Engineering
$125.00
Description With this Stork Leg Upgrade kit for your Equinox detector, you will glide through the water with ease. The lower shaft is 10mm carbon fiber, mid shaft is 1/2″ OD carbon fiber! Super Light! (The two shafts fit into your suit case) This design maintains our design goal of a handle that glides through the water with reduced stress and ...

White's Arm Cuff Pad
$9.99
Foam arm rest pads for inside of Arm Cuff. Self adhesive on back. Set of 2 PN: 802-5309

XP Deus II RemoteControl Headphone Jack Adaptor
$12.90
XP DEUS II Remote Control Headphone Jack Adaptor allows for connecting a wired headphones. PN: D2-RC1-G0-002