- Home
 - Accessories All
 
Accessories All

Minelab Upper Shaft for FBS
$65.00
Replacement Upper Shaft for all Minelab FBS machines. PN: 3011-0195

Minelab Lower Shaft for the Equinox 700/900 Metal Detectors
$65.00
New Lower Shaft for the Equinox 700/900 Metal Detectors PN:3011-0468

RTG Galvanized Deluxe Adjustable 5" Quick Drain Sand Scoop #SS-702
$65.75
It is a 2-in 1 sand scoop. This scoop can be used as an adjustable long handled scoop or it can be separated into a 9” hand scoop. The long handle slides into the short handle and is secured with a spring clip. The long handle has 4 adjustable positions. These handles are made of anodized aluminum. There are rubber hand grips on both handles. ...

Minelab Manticore LI Ion Rechargeable Battery
$66.96
Manticore Li Ion 25 Wh Recharable Battery PN:3011-0486

RTG Galvanized Deluxe Adjustable 4" Quick Drain Sand Scoop #SS-701
$67.50
Mfg. ID: SS-701This is our 2-in-1 deluxe beach scoop. This scoop can be used as an adjustable long handled scoop or it can be separated into a 9” hand scoop. The long handle slides into the short handle & is secured with a spring clip. The long handle has 4 adjustable positions. These handles are made of anodized aluminum. There are rubber h...

Garrett Z-Lynk WR-1 Wireless Receiver
$67.95
Includes: WR-1 wireless receiver with ¼" connector One USB charging cable PN: 1627600

Lesche All Purpose Shovel
$69.00
Super strong, rust-resistant, smooth and lightweight. Five year guarantee against breakage under normal use. Long tapered cutting edge resists dents and nicks from hard digging conditions. Virtually self-sharpending during use. Specs: Blade length: Curved Overall length: 26" Weight: 2.3 lbs.

Lesche Sampson 31 Inch T-Handle No Blade Serration
$69.25
The digging tool is made of heavy duty steel that is welded for extra strength. The overall length of this digging tool is 31”. The handle is 23 1/2” long and has a T Grip. The blade is 7 ½” long by 4” wide with no serrations on blade. Made in the USA.

Deus II Bone Conduction Headphones
$69.90
Bone conduction headphones! XP is proud to present the first bone conduction headphones designed for metal detecting, Made in France by XP, it is waterproof IP68 so you can dive with your DEUS II up to 20m deep. PN:BH-01

CKG Sifter Shovel w/ Carbon Fiber Handle
$69.95
CKG LIGHT WIEGHT Sand Sifting Shovel. Carbon Fiber Handle with Steel Blade. Length is 39" Shovel Blade 9" x 11" with .39"(10 MM) holes Weight 2.2 lbs.

Garrett Soft Case Carry Bag Digital Camouflage
$72.29
Padded travel/storage bag, 50" length with full zipper opening, carrying handle and backpack straps. Stow and go—Holds any current Garrett detector without removing the search coil!Five velcro pouches to hold spare searchcoils, a Pro-Pointer®, manual, recovery tools, gloves, etc. PN: 1616901

Lesche Sampson 31 Inch T-Handle Single Serrated Blade
$73.25
The digging tool is made of heavy duty steel that is welded for extra strength. The overall length of this digging tool is 31”. The handle is 23 1/2” long and has a T Grip. The blade is 7 ½” long by 4” wide with Serration on one side of blade. Made in the USA.

Lesche Sampson 18 Inch T-Handle No Serration
$74.00
No serrated blade will dig through the toughest roots and soil. Best on the market! Made in the USA, aircraft-quality tubing. Blade is heat treated for great strength. This is a custom made shovel for the metal detecting industry. The 18" length is less conspicuous when hunting parks but need the extra leverage when digging.

White's NiMH Charger Stand
$74.90
NiMH Battery Charger Stand and 509-0042 Charger 802-5281 or 802-5281-1 NiMH Rechargeable Battery (not included). Holds Battery and completes / monitors charger electrical functions. Stand ONLY. PN: 802-5285

Minelab Standard Lower Shaft for all FBS Detectors
$75.00
Standard replacement shaft for all FBS detectors. Quattro, Safari, Explorer XS, Explorer II, Explorer Pro and E-Trac. PN: 3011-0205

Lesche Sampson 31 Inch T-Handle Double Serrated Blade
$75.00
The digging tool is made of heavy duty steel that is welded for extra strength. The overall length of this digging tool is 31”. The handle is 23 1/2” long and has a T Grip. The blade is 7 ½” long by 4” wide with Serration on both sides of blade. Made in the USA.

Lesche Sampson 36 Inch T-Handle No Blade Serrations
$75.00
The digging tool is made of heavy duty steel that is welded for extra strength. The overall length of this digging tool is 36”. The handle is 28 1/2” long and has a T Grip. The blade is 7 ½” long by 4” wide . Made in the USA.
Sun Ray PZ-1 Invader Probe for White’s Prizm, Coinmaster, and Coinmaster Pro Series. (NEW)
Pinpointer

Sun Ray PZ-1 Invader Probe for White’s Prizm, Coinmaster, and Coinmaster Pro Series. (NEW)
$75.00
Sun Ray PZ-1 Invader Probe for White’s Prizm, Coinmaster, and Coinmaster Pro Series. New Unused $75 ($189). NO WARRANTY.

Whites 4"x6" Eclipse DD Coil with shaft-USED
$75.00
Eclipse Shooter "DD" (4 x 6") Search Coil for Spectra V3, DFX, MXT, and M6. Elliptical 4 x 6" "DD" design provides superior performance in extreme ground, better sensitivity to physically smaller metal targets, performance in extreme trash and physically smaller foot print for working around obstacles. Longer but narrower detection window compar...

Whites M6 Concentric Coil with Shaft (USED)
$75.00
Whites M6- 9.5" Coil is compatible with 3Vi, VX3, MXT, M6, DFX and MX5 metal detectors

Garrett Crossfire II Supreme Deepseeker 12.5" coil- USED)
$75.00
The "Garrett Crossfire II Supreme Deepseeker 12.5" coil" is a large, specialized search coil for certain Garrett metal detectors, like the GTI series and GTAx550. It is designed for deep detection and is considered a "PROformance Imaging" coil, which uses Garrett technology to provide information on a target's depth and size. It is best used for...

Lesche Sampson 18 Inch T-Handle Single Serrated Blade
$76.00
With serrated edge to dig through the toughest roots and soil. Best on the market! Made in the USA, aircraft-quality tubing. Blade is heat treated for great strength. This is a custom made shovel for the metal detecting industry. The 18" length is less conspicuous when hunting parks but need the extra leverage when digging.

Garrett Ace Series 4.5 Inch Round Sniper Coil
$76.95
The Ace Series 4.5' round super sniper searchcoil is an ideal optional accessory for any detector if you plan to search for targets in tight areas - such as among roots, rocks or even under playground equipment. This is a perfect addition to your detecting arsenal and is compatible with all of the ACE series. PN: 2221800

Garrett Razor Relic Shovel
$76.95
36" total length with 9" digging blade. Comfortable T-handle and robust steel blade with cutting edge teeth to power through roots and tough soil. Includes Garrett carry sheath for blade protection. Weight: 61.6 oz. PN:1664900

Lesche Sampson 18 Inch T-Handle Double Serrated Blade
$78.00
With double serrated edge to dig through the toughest roots and soil. Best on the market! Made in the USA, aircraft-quality tubing. Blade is heat treated for great strength. This is a custom made shovel for the metal detecting industry. The 18" length is less conspicuous when hunting parks but need the extra leverage when digging.

Lesche Sampson 32 Inch Ball Handle No Serration
$79.00
The digging tool is made of heavy duty steel that is welded for extra strength. The overall length of this digging tool is 32”. The handle is 24” long and has a steel ball welded at the top. The blade is 7 ½” long by 4” wide. Made in the USA.

Minelab Pro-Find 15 Pinpointer
$79.00
PRO-FIND Series pinpointers help you to accurately locate targets inside a small hole or crevice where a metal detector coil cannot fit. This results in smaller holes, less environmental disruption and faster target recovery time. PN:3226-0002

Lesche Sampson 36 Inch T-Handle Single Serrated Blade
$79.60
The digging tool is made of heavy duty steel that is welded for extra strength. The overall length of this digging tool is 36”. The handle is 28 1/2” long and has a T Grip. The blade is 7 ½” long by 4” wide with Serration on one side of blade. Made in the USA.

Minelab Excalibur Battery Charger Adapter (Ikelite)
$80.00
Battery Charger Adapter for Minelab Excalibur metal detectors. Fits all Excalibur series metal detectors. PN: 3011-0201 Listing and template services provided by inkFrog

Lesche Ground Shark 28 Inch T-Handle Serrated
$80.00
With serrated edge to dig through the toughest roots and soil. Best on the market! Made in the USA, aircraft-quality tubing. Blade is heat treated for great strength.

Lesche 31 Inch Sampson Relic Shovel
$80.00
Relic Shovel with serrated edge to dig through the toughest roots and soil. Best on the market! Made in the USA, aircraft-quality tubing. Blade is heat treated for great strength. Specs:Serrated edge for cutting. Overall length: 31" Weight: 3.0 lbs

Minelab Pro Find 20 Pinpointer
$80.00
The PRO-FIND 20 offers essential core pinpointer features in a splash proof housing, designed for simplicity and ease of use with audio and vibrate target indication. Locate coins, rings & gold with speed and accuracy. PRO-FIND 20 Includes: PRO-FIND 20 pinpointer Holster Multi-language instructions PN:3226-0004

Minelab Upper Shaft for Equinox 700/900 Metal Detectors
$80.00
Upper Shaft for the NEW Minelab Equinox 700/900 Metal Detectors PN:3011-0466

Lesche Sampson 36 Inch T-Handle Double Serrated Blade
$81.25
The digging tool is made of heavy duty steel that is welded for extra strength. The overall length of this digging tool is 36”. The handle is 28 1/2” long and has a T Grip. The blade is 7 ½” long by 4” wide with Serration on two sides of blade. Made in the USA.

Nokta PulseDive Replaceable 8" Scuba Search Coil Unit in Yellow
$84.99
Nokta Makro PulseDive Replaceable 8" Scuba Search Coil Unit in Yellow. Add this search coil to the Nokta Makro PulseDive Pinpointer and turn the pinpointer into a PulseDive Hand-Held Underwater Scuba Detector. PN:17000167

Nokta Legend Waterproof Battery Li-Po 3.7V 5500mAh & Charger
$84.99
Nokta-Macro Legend Waterproof Battery Li-Po 3.7V 5500mAh & Charger PN:17000456

Minelab Excalibur Car Charger
$85.00
Need power on the run? Car charger fits all Excalibur metal detectors. PN: 3011-0210

Treasure Products Vibra Probe 580 Pinpointer (NEW))
$85.00
Waterproof - Unique sealed design allows the Vibra-Probe to be used in the rain, mud, or under water to a depth of 100 feet. Automatic tuning - The state of the art microprocessor controlled design requires no adjustments of any kind. Tilt On and Off - No push button switches. The Vibra-Probe 580 turns on and off when pointed upward or will au...

Minelab Tall Man Lower Shaft for all FBS Metal Detectors
$85.32
It will increase the length of the lower shaft of all FBS detectors .Quattro, Safari, Explorer XS, Explorer II, Explorer Pro and E-Trac. PN: 3011-0204

Anaconda NX-5 Tempered Steel 31" Shovel w/ Double Serrated Blade & Foot Pegs
$89.96
KG and Rings personally designed these shovels to work in the toughest conditions around the world. They even have a built in bottle opener below the foot peg. NX-5 Shovel Specs: Tempered steel - Heat treated for durability Powder coated (black) Teeth on blade edges for cutting roots Wide, non-slip foot pegs Built-in, double-sided bottle opener...

Minelab Manticore Lower Shaft
$90.00
Official Minelab Manticore lower shaft. PN:3011-0481

RTG Aluminum Straight 5" Sand Scoop #SS-STR
$94.75
This scoop has a fixed 36" long straight anodized aluminum handle with a rubber grip for comfort. The aluminum bucket has 5/8" diameter holes punched into the sides and the back of the scoop. The bucket of this heavy gauged sand scoop is 5" in diameter by 7" long. There is an aluminum bracket welded to the bucket and handle for added strength. O...

Garrett PROformance 9" x 12" Eliptical Concentric Coil for GTAx/ GTP 1350 (NEW)
$95.00
Garrett PROformance 9" x 12" Eliptical for GTP 1350. This coil is Discontinued and is new and unused.

Garrett GTI Super Sniper 4.5" Search Coil (NEW)
$95.00
Use to find smaller, shallower targets in trashy and/or confined areas.T his coil is Discontinued and is new and unused. PN:2219700

Treasure Products Vibra-Probe 585 Pinpointer (NEW)
$99.00
Thinking about buying a pinpointer metal detector? Don't do it! Unless it has the following features... - Tip-only detection - Tilt on & off - Pulse Induction (PI) - Communicates with vibration - Automatic calibration - Low-battery alert - Waterproof - Submersible to 100 feet (30 meters) - Auto-off (after one minute) battery saver Introducin...

RTG Stainless Steel Royal 5" Water Sand Scoop #SS-RYL
$99.00
Mfg. ID: SS-RYLThe bucket is made of 304 stainless steel with 5/8' holes punched through out the bucket. The handle is also stainless steel. The scoop bucket is almost 11" long by 5-1/2" in diameter. The bucket is 14 gauge stainless steel. There is a round stainless tubing welded on the back of the bucket to the handle for strength and for a f...

Minelab Pro-Find 35 Pinpointer
$99.00
PRO-FIND Series pinpointers help you to accurately locate targets inside a small hole or crevice where a metal detector coil cannot fit. This results in smaller holes, less environmental disruption and faster target recovery time. PN: 3226-0003 PRO-FIND 35 Includes: PRO-FIND 35 pin-pointer Holster Lanyard 9V PP3 battery Multi-language instruct...

Garrett GTI 2500 8.5" x 11" PROformance DD Coil (NEW)
$99.00
Garrett GTI 8.5" x 11" PROformance DD Coil This coil is Discontinued and is new and unused. PN:2222200
        














































